ePRO Battery Charger – 12V 90A
Enerdrive have a new programmable ePRO battery charger that takes battery charging technology to new heights. The ePRO battery chargers are equipped with the latest power conversion techniques to set new reliability and efficiency standards.
Features of the ePRO programmable battery chargers
The ePRO 12V 90A, 24V 50A and 80A models combine new power conversion techniques and the best available parts with years of power electronics design expertise. The ePRO battery chargers are developed to perform without problems in the most demanding environments. A unique active rectifier output stage ensures unmatched efficiency figures. Combined with active PFC, the ePRO battery chargers are very energy efficient. This will reduce running costs and guarantees a maximum charge current per AC Watt.
All ePRO battery chargers are equipped with advanced 4 stage charging algorithms and temperature compensation for optimal battery performance and long lifetimes. Users are also allowed to create a custom charging algorithm for their specific battery, using the “Dashboard” software. ePRO battery chargers are also suitable to charge Lithium Iron Phosphate (LiFePo4) batteries. The standard available TBSLink port enables remote control and readout via the optional TBS Remote Controls.
All ePRO battery charger models, are equipped with 3 full current isolated outputs, allowing simultaneous charging of 3 battery banks. Additionally, these models allow up to 6 units to be connected in parallel, reaching charging current levels of up to 540Amps!
The features and built quality of the ePRO programmable battery chargers allow these chargers to be used in a wide range of applications. Some of these applications include industrial-, marine- and recreational vehicle power systems.
|Note: Specifications subject to change without notice.|
|AC input voltage||100-260Vac / 47-63Hz / PF > 0.9||180-260Vac|
|Full load power consumption||1550VA||1700VA||2750VA|
|AC input current (115V/230V)||13.5A / 6.8A||15A / 7.5A||– / 12A|
|Total DC output current||90A||50A||80A|
|Nominal DC output voltage||12Vdc||24Vdc|
|Number of full current outputs||3 (internally isolated)|
|Charge characteristic||IUoUoP, intelligent 4-stage, temp. compensated|
|Standard absorption voltage||14.4Vdc||28.8Vdc|
|Standard float voltage||13.5Vdc||27.0Vdc|
|Standard equalize voltage||15.8Vdc||31.6Vdc|
|Supported battery types||Flooded / Gel / AGM / LiFePO4 / Custom|
|Recommended battery capacity||180-900Ah||100-500Ah||160-800Ah|
|DC current draw (charger off)||< 0.1mA|
|Operating temp. Range||-10°C…+55°C (humidity max. 90% non condensing)|
|Storage temp. Range||-20°C…+70°C (humidity max. 90% non condensing)|
|Cooling||Variable speed fan|
|ePRO Link enabled||Yes|
|Protections||Low AC input voltage, output short circuit, high temperature, battery overcharging and reverse polarity (fuse)|
|Indications||Power on, output current, state of charge, error|
|DC output connections||4x M8 bolts|
|AC input connections||Screw terminals|
|Enclosure body size (HxWxD)||370 x 271 x 132mm|
|Protection class||IP21 (mounted in upright position)|
|Standards||CE marked. EMC : EN55016-2-1(/A1), EN55016-2- 3(/A1), EN 61000-4-2(3/4/5/6). Safety : EN60335-1, EN60335-2-29 Complies with AS/NZS 60335.2.29 Including Australian deviations.|